Filter
Top Products
-4- G1061/G1061Z Buffing System
Additional Safety Instructions For Buffers
1. ALWAYS WEAR EYE PROTECTION!
2. WEAR AN APPROVED DUST MASK
OR RESPIRATOR. Buffing operations
produce dust.
3. MAKE SURE BUFFER IS SECURED
FIRMLY TO A BENCH OR STAND
BEFORE USE. Any “wobbles” must be
corrected by shimming or blocking before
operation.
4. DO NOT USE GRINDING WHEELS ON
THIS MACHINE. It is strictly designed for
buffing and drum sanding only.
5. DO NOT stand directly in front of buffing
or sanding accessories when turning
machine on.
6. PERFORM machine inspections and
maintenance service promptly when
called for.
7. DO NOT allow your hands to come into
contact with sanding drums or buffing
wheels during operation. Abrasive acces-
sories have the ability to remove a lot of
material, including skin, very quickly.
8. ANY PROBLEM concerned with any
moving parts or accessories must be
investigated and corrected with the
power disconnected, and after everything
has come to a complete stop.
9. NEVER leave the machine running unat-
tended.
10. NEVER BUFF OR SAND BY PLACING
THE WORKPIECE ON TOP OF THE
WHEEL. The wheel may kick the work-
piece toward the operator. Always buff
on the downward part of the wheel.
11. HOLD THE WORKPIECE FIRMLY
WHILE BUFFING OR SANDING.
No list of safety guidelines can be com-
plete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. Failure to follow guidelines could
result in serious personal injury, damage
to equipment or poor work results.
To operate this or any power tool safely and
efficiently, it is essential to become as famil-
iar with it as possible. The time you invest
before you begin to use your Model
G1061/G1061Z will be time well spent. DO
NOT operate this machine until you are
completely familiar with the contents of this
manual or serious personal injury may
occur.