Filter
Top Products
G3183 Hollow Chisel Mortiser -3-
12. USE SAFETY GLASSES AND EAR PRO-
TECTION. Also use a DUST MASK if the
operation is dusty.
13. DO NOT OVERREACH. Keep proper footing
and balance at all times.
14. MAINTAIN TOOLS IN TOP CONDITION.
Keep tools sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
15. DISCONNECT TOOLS FROM POWER
before servicing and when changing acces-
sories.
16. AVOID ACCIDENTAL STARTING. Make
sure the switch is in the “OFF” position
before plugging in the cord.
17. CHECK DAMAGED PARTS. Do not operate
the machine until you are certain it is in per-
fect running condition.
18. NEVER LEAVE THE TOOL RUNNING
UNATTENDED - TURN POWER OFF. Do
not leave the tool until it comes to a full stop.
19. DO NOT OPERATE THE TOOL IF USING
DRUGS, ALCOHOL, OR MEDICATION.
20. DO NOT WORK IN HASTE or operate
machine if you are fatigued.
21. IF THERE IS SOMETHING YOU DO
NOT KNOW OR UNDERSTAND
ABOUT THIS TOOL, DO NOT OPER-
ATE IT! Ask for help first. Confusion
can lead to disaster.
22. BAD HABITS ARE DANGEROUS. Review
all safety procedures often.
These safety rules cannot cover every situation in
a woodshop. Consider your conditions when set-
ting up or operating your Hollow Chisel Mortiser.
1. KNOW YOUR POWER TOOL. Read the
owner’s manual carefully. Learn the tool’s
applications and limitations, as well as its
particular hazards.
2. KEEP ALL GUARDS IN PLACE and in
working order.
3. GROUND ALL TOOLS. If an adapter is
used to accommodate a two-prong recepta-
cle, the adapter plug must be attached to a
known ground. Never remove the grounding
prong.
4. REMOVE ADJUSTING KEYS AND
WRENCHES. Make it a habit to check that
keys and wrenches are removed from the
machine before turning it on.
5. KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
6. AVOID DANGEROUS ENVIRONMENTS.
Do not use power tools in damp or wet loca-
tions or expose them to rain. Keep your work
area well lighted.
7. KEEP CHILDREN AND VISITORS AWAY.
All children and visitors should be kept a safe
distance away from your work area.
8. MAKE WORKSHOP CHILD-PROOF with
padlocks, master switches, or by removable
starter keys.
9. DO NOT FORCE TOOL. Tools work better
and safer when they are allowed to perform
at their own speed.
10. WEAR PROPER APPAREL. Do not wear
loose clothing, gloves, neckties, or jewelry
that can get caught in moving parts. Non-slip
footwear must be worn. Long hair should be
tied back or wear a hat.
11. NEVER STAND, OR LEAN ON THE TOOL.
Doing so could cause injury.
Safety Rules For All Tools