Filter
Top Products
Model G5354 Airbrush-8-
Needle Chuck: Loosens the needle for air
spray adjustment.
Needle: The position of the needle relative
to the spray tip controls the shape and size
of the spray pattern. Unlock the needle
then slide it in or out to adjust the spray.
Trigger: Operates the flow of paint through
the airbrush.
Trigger Stop: Adjusts how far trigger
returns when released.
Air Intake: Connects to the air compres-
sor.
Siphon Tube: Connects to the glass jar
or metal jar.
Spray Regulator: When rotated, regu-
lates the amount of fluid that comes out.
Controls
Figure 6. Controls.
Needle
Chuck
3. Connect the hose from the air com-
pressor to an air regulator, then adjust
the air pressure to 30 PSI.
4. Connect the adapter with the air hose
to the air regulator (see Figure 4).
Figure 4. Adapter attached to regulator.
5. The glass jar with suction lid or the
metal jar installs in the airbrush by
pushing the nozzle into the receiver
tube on the airbrush body. Figure
5 shows an example of the metal jar
installed.
Figure 5. Metal jar installed on airbrush.
Trigger Stop
Trigger
Needle
Air Intake
Siphon
Tube
Spray
Regulator