Filter
Top Products
G6050 Round Head Framing Nailer Kit-8-
Always disconnect air from nailer
whenever clearing a jammed nail!
Clearing Jammed Nails
The most frequent situation with any type
of nailer is a nail jam. A jammed nail must
be cleared before using the nailer again.
The two places where a nail can get
jammed are the magazine and the dis-
charge area.
To clear a jammed nail from the magazine:
1. Disconnect the nailer from the air
supply!
2. Pull the magazine pusher all the way
back until it locks in place.
3. Locate and remove the jammed nail
with a pair of needle nose pliers.
Close the magazine cover so it latch-
es.
To clear a jammed nail from the discharge
area with the Model G6050:
1. Disconnect the nailer from the air
supply!
2. Pull the magazine pusher all the way
back until it locks in place.
3. Remove all nails from the magazine.
4. Locate the nail inside of the nailer
nose.
5. Find a tool that will fit inside the slot on
the underside of the nose and dis-
lodge the nail.
6. Throw the damaged nail away and
insert a new nail stick that only con-
tains clean, undamaged nails. DO
NOT use dirty or damaged nails in
your nailer!