Filter
Top Products
-10-
G7211/7212 24" Bandsaw
SECTION 4: ASSEMBLY
Fence
Most of your G7211/G7212 24'' Bandsaw has
been assembled at the factory. Only the fence
assembly requires installation.
To mount the fence to the bandsaw table:
1. Mount the front rail to the table using two (2)
5
/16 - 18 x 2
1
/2'' Cap Screws and the two (2)
Spacers provided. See Figure 2.
2. Loosen the fence lock knob and slide the
fence onto the rail.
Figure 2. Front rail in place and fence installed.
DO NOT attempt any step of assembly,
adjustments, or maintenance while your
Model G7211/G7212 is running. Ensure that
the switch is off, power is disconnected and
moving parts have stopped before making
adjustments. Failure to comply may result
in serious personal injury.