Filter
Top Products
-6- G7945/46 Radial Drill Press
SECTION 3: INTRODUCTION
We are proud to offer the Grizzly Model G7945/46
Radial Drill Press. The Model G7945/46 is part of
a growing Grizzly family of fine woodworking
machinery. When used according to the guide-
lines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
The Model G7945/46 is a five speed radial drill
press that features variable swing up to 34" and
pivoting head for drilling at just about any angle.
A
1
⁄2 H.P. motor powers the drill press from 550 to
3470 R.P.M. to handle a wide variety of drilling
needs. The table tilts 90° in both directions and
swings 360°. The Model G7946 is exactly the
same as the Model G7945, but adds the double
pivot table support as well as being a floor model.
A number of bits, sanding drums, and other
accessories are available for the Model G7945/46
through the Grizzly catalog.
We are also pleased to provide this manual with
the Model G7945/46. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G7945/46 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep it
for reference.
Commentary
Read the manual before
assembly and opera-
tion. Become familiar
with the machine and
it’s operation before
beginning any work.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
After fall 2001:
Grizzly Industrial, Inc.
1203 Lycoming Circle
Pennsdale, PA 17756