Filter
Top Products
-38-
G8144Z/G8145Z/G8146Z
Vertical Metal Cutting Bandsaw
Lubrication
The bearings on your bandsaw are factory lubri-
cated and sealed. Merely leave them alone unless
they need to be replaced.
When needed, brush a light coat of multi-purpose
grease on the tension leadscrew (all Models) and
guide post rack (Model G8146Z only) to maintain
smooth operation (see Figures 44 & 45).
If the table becomes difficult to tilt, position it so
that you can brush a thin coat of multi-purpose
grease on the trunnion surface (see Figure 46).
Figure 44. Model G8144Z/G8145Z tension
leadscrew.
Figure 45. Model G8146Z tension leadscrew
and guide post rack.
Guide Post Rack
Tension
Leadscrew
Figure 46. Table tilted to expose trunnion
surface.
Trunnion
Surface