Filter
Top Products
Ultimate Series Jointers -9-
Grounding
Extension Cords
No single list of electrical guidelines can
be comprehensive for all shop environ-
ments. Operating this machinery may
require additional electrical upgrades spe-
cific to your machine and shop environ-
ment. It is your responsibility to make sure
your electrical systems comply with all
local electrical codes and ordinances.
We do not recommend the use of extension
cords with 220V single or 3-phase equipment.
Instead, arrange the placement of your equip-
ment and the installed wiring to eliminate the
need for extension cords.
Electrocution or a fire
can result if the machine
is not grounded correct-
ly. Make sure all electri-
cal circuits are ground-
ed. DO NOT use the
machine if it is not
grounded.
Minimum Cord Size
For 220V single-phase operation, use the follow-
ing power cord:
G9953Z/G9953ZX—220V, Single-Phase
Cord ..............................................2 Pole, 3 Wire
Gauge ..............................................................10
For 220V 3-phase operation, use the following
power cord:
G9953ZXF—220V, 3-Phase
Cord ..............................................3 Pole, 4 Wire
Gauge ..............................................................10
G4815—220V, 3-Phase
Cord ..............................................3 Pole, 4 Wire
Gauge ..............................................................10
In the event of an electrical short, grounding
reduces the risk of electric shock by providing a
path of least resistance to disperse electric cur-
rent. This machine is equipped with a power cord
that has an equipment-grounding prong. The out-
let must be properly installed and grounded in
accordance with all local codes and ordinances.