Filter
Top Products
G9984/G9985 Oscillating Belt Edge Sander -9-
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• (2) Base Support
• (2) Star Knob M10-1.5 x 15
• (4) Lock Washer 10mm
• (6) Flat Washer 10mm
• (4) Hex Bolt M10-1.5 x 30
• (4) Rubber Foot
1
⁄2"-12 x 1
• (1) Sanding Belt 9" x 138
1
⁄2"
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
Figure 5. Parts layout.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
The Model G9984/G9985
is a heavy machine with a
792 lb. shipping weight.
DO NOT over-exert your-
self while unpacking or
moving your machine –
you will need assistance
and power equipment.
Serious personal injury
may occur if safe moving
methods are not fol-
lowed.
Make sure floor structure
is capable of supporting
the combined weight of
the machine parts and
people.