Grizzly H6146 Nail Gun User Manual


 
H6146 34° Clipped Head Framing Nailer
-4-
INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H6146 34º Clipped Head Framing Nailer.
This model is part of a growing Grizzly
family of fine pneumatic tools. When used
according to the guidelines set forth in this
manual, you can expect years of trouble-
free, enjoyable operation and proof of
Grizzly’s commitment to customer satis-
faction.
The Model H6146 is designed to toe-
nail into corners. This nailer is ideal for
framing, pallet and crate assembly, and
deck, roof, fencing and sidewall sheathing
construction. The Model H6146 features
a 360° exhaust port, comfort grip rubber
handle, and economical air consumption
with low noise.
The specifications, details, and photo-
graphs in this manual represent the Model
H6146 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword
Contact Info
Machine Data
Nail Size ................
7
64"-
1
8" Shank Diameter
Nail Strip Angle ......................................34º
Nail Length .......... 2"-3½"(Clipped Headed)
Magazine Capacity ...................... 100 Nails
Air Inlet ...........................................¼" NPT
Weight .............................................8
1
3 lbs.
Operating Pressure .................. 70-120 PSI
Read the manual before operation.
Become familiar with this nailer, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.