Grizzly H6310 Air Compressor User Manual


 
Model H6310 Jump Starter/Compressor -9-
Symptom Possible Cause Possible Solution
Car will not jump
start.
1. Bad connection at car battery
posts.
2. Car battery has lost too much
charge.
3. Car battery is dead.
1. Clean battery posts, or rotate
terminal clamps on post with firm
pressure to establish contact.
2. Recharge car battery.
3. Replace car battery.
Flashlight does
not work when
unit is charged.
1. Bulb burned out or damaged.
2. Switch is damaged.
1. Replace the bulb.
2. Replace switch.
Unit will not
charge.
1. Charger or cord is damaged.
2. Indicator light burned out, giv
-
ing the appearance that unit
is not charging.
3. Unit damaged from charging
beyond maximum time of 24
hours (current overload).
1. Replace the charger.
2. Monitor charging progress with
the voltage meter.
3. Replace.
No output from
3V, 6V, 9V sock
-
ets.
1. Unit damaged from charging
beyond maximum time of 24
hours (current overload).
2. Distributor damaged.
1. Replace unit.
2. Replace distributor.
Air pump does
not work.
1. Switch damaged.
2. Air pump damaged.
1. Replace switch.
2. Replace air pump.
12V Socket has
no output.
1. Cord or plug damaged.
2. Socket damaged.
1. Replace cord.
2. Replace socket.
Voltage meter
stops or does
not work.
1. Meter damaged.
2. Needle stuck on the face
plate.
3. Switch damaged.
1. Replace the meter.
2. Remove cover and free up the
needle.
3. Replace switch.
TROUBLESHOOTING