Filter
Top Products
H7664 2-in-1 Combination Nailer/Stapler
-8-
SECTION 2: INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H7664 2-in-1 Combination Nailer/Stapler.
This model is part of a growing Grizzly
family of fine pneumatic tools. When used
according to the guidelines set forth in this
manual, you can expect years of trouble-
free, enjoyable operation and proof of
Grizzly’s commitment to customer satis-
faction.
The Model H7664 features a 360° exhaust
port, comfort grip rubber handle, and eco-
nomical air consumption with low noise.
The Model H7664 can shoot
5
⁄8"-2", 18
Gauge brad nails and 18 Gauge
5
⁄8"-1
5
⁄8",
1
⁄4" crown staples.
The specifications, details, and photo-
graphs in this manual represent the Model
H7664 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword Contact Info
Tool Data
Brad Length ....................
5
⁄8"-2" (18 Gauge)
Staple Length ..................................
5
⁄8"-1
5
⁄8"
Staple Crown .......................
1
⁄4" (18 Gauge)
Magazine Capacity ....................100 pieces
Air Inlet ...........................................¼" NPT
Weight .............................................3.3 lbs.
Operating Pressure .................. 60-100 PSI
Read the manual before operation.
Become familiar with this nailer/sta-
pler, its safety instructions, and its
operation before beginning any work.
Serious personal injury may result if
safety or operational information is
not understood or followed.