Filter
Top Products
H7949/H7950/H7951 Nailer
-4-
INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H7949/H7950/H7951 Nailer. This nailer
is part of a growing Grizzly family of fine
pneumatic tools. When used according
to the guidelines in this manual, you can
expect years of trouble-free, enjoyable
operation and proof of Grizzly’s commit-
ment to customer satisfaction.
The specifications and photographs in this
manual represent Model H7949/H7950/
H7951 as supplied when this manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword
Contact Info
Nail Type ..................Flat Wire Welded Coil
Nail Length ..................................1
1
/2"–2
1
/2"
Magazine Capacity ..............250–400 Nails
Weight .............................................5.5 lbs.
Air Inlet ..........................................
1
/4" NPT.
Operating Pressure ................. 70–110 PSI
Model H7949
Specifications
Model H7951
Specifications
Nail Type ..................Flat Wire Welded Coil
Nail Length ..................................1
1
/2"–2
3
/4"
Magazine Capacity ..............250–400 Nails
Weight .............................................6.2 lbs.
Air Inlet ..........................................
1
/4" NPT.
Operating Pressure ................. 70–110 PSI
Model H7950
Specifications
Nail Type ..................Flat Wire Welded Coil
Nail Length ....................................
3
/4"–1
3
/4"
Magazine Capacity ..............250–400 Nails
Weight .............................................5.5 lbs.
Air Inlet ..........................................
1
/4" NPT.
Operating Pressure ................. 70–110 PSI