Filter
Top Products
Model H8115/H8117 Spray Gun -13-
The atomizing cap needs to be adjusted
for horizontal (Figure 7 & 8) or verti-
cal (Figure 9 & 10) spraying patterns.
Spraying in the opposite direction may
lead to material build up on the atomizing
cap horn. Many performance problems
are caused by clogged atomizing holes on
the atomizing cap horns (see Cleaning on
Page 15).
Figure 7. Set up for horizontal stroke,
Model H8115.
Figure 9. Set up for vertical spray stroke,
Model H8115.
Figure 11. Fan adjustment, Model H8115.
Rotating the pattern adjustment control
in Figure
9 or 10 will give you a range
between the two patterns in Figure 11.
5
29
/32"
Stroke
Pattern Control
Atomizing Cap and
Fan Adjustments
Figure 10. Set up for vertical spray stroke,
Model H8117.
Figure 8. Set up for horizontal stroke,
Model H8117.
Stroke
Holes
Pattern Control
Stroke
Holes
Stroke
6"-8"