Filter
Top Products
Model H8124 7.2V Mini Grinder Kit -3-
7. ONLY ALLOW TRAINED AND PROP-
ERLY SUPERVISED PERSONNEL
TO OPERATE MACHINERY.
Make
sure operation instructions are safe
and clearly understood.
8. KEEP CHILDREN AND VISITORS
AWAY. Keep all children and visitors
a safe distance from the work area.
9. MAKE WORKSHOP CHILD PROOF.
Use padlocks, master switches, and
remove switch keys.
10.
NEVER LEAVE WHEN MACHINE IS
RUNNING
. Turn power OFF and allow
all moving parts to come to a complete
stop before leaving machine unat
-
tended.
11. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use
machinery in damp, wet locations,
or where any flammable or noxious
fumes may exist.
12. KEEP WORK AREA CLEAN AND
WELL LIT. Clutter and dark shadows
may cause accidents.
13. USE A GROUNDED EXTENSION
CORD RATED FOR THE MACHINE
AMPERAGE. Undersized cords over-
heat and lose power. Replace exten
-
sion cords if they become damaged.
DO NOT use extension cords for 220V
machinery.
14.
ALWAYS DISCONNECT FROM POWER
SOURCE BEFORE SERVICING
MACHINERY
. Make sure switch is in
OFF
position before reconnecting.
15.
MAINTAIN MACHINERY WITH CARE
.
Keep blades sharp and clean for
best and safest performance. Follow
instructions for lubricating and chang
-
ing accessories.
16. REMOVE ADJUSTING KEYS AND
WRENCHES. Make a habit of check-
ing for keys and adjusting wrenches
before turning machinery ON.
17.
CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY
. Check
for binding and alignment of parts,
broken parts, part mounting, loose
bolts, and any other conditions that
may affect machine operation. Repair
or replace damaged parts.
18.
USE RECOMMENDED ACCESSORIES
.
Refer to the instruction manual for
recommended accessories. The use
of improper accessories may cause
risk of injury.
19. DO NOT FORCE MACHINERY.
Work
at the speed for which the machine or
accessory was designed.
20. SECURE WORKPIECE. Use clamps
or a vise to hold the workpiece when
practical. A secured workpiece pro
-
tects your hands and frees both hands
to operate the machine.
21. DO NOT OVERREACH. Keep proper
footing and balance at all times.
22. MANY MACHINES WILL EJECT
THE WORKPIECE TOWARD THE
OPERATOR. Know and avoid condi-
tions that cause the workpiece to
"kickback."
23. BE AWARE THAT CERTAIN WOODS
MAY CAUSE AN ALLERGIC REAC
-
TION in people and animals, especial-
ly when exposed to fine dust. Make
sure you know what type of wood dust
you will be exposed to and always
wear an approved respirator.