Filter
Top Products
Model H8124 7.2V Mini Grinder Kit -5-
Additional Safety Instructions for
Batteries and Chargers
1.
CHARGING EQUIPMENT
. Only charge
using the charger and batteries sup-
plied with your grinder. DO NOT use
batteries or charges from other cord-
less tools.
2. CHARGING ENVIRONMENT. Charge
battery on a dry, hard surface in a
shaded location with good ventila-
tion. DO NOT place charger on or
near flammable materials. DO NOT
cover the charger when charging.
Only charge the battery when the
temperature is between 50°F–104°F
(10°C–40°C). Charging in tempera-
ture beyond these extremes will dam-
age the battery.
3. CHARGER VOLTAGE. ONLY
plug into a circuit that is 110-120V.
Connecting into 220V will damage the
charger, possibly causing a fire or an
explosion. DO NOT charge from a DC
power supply or a generator.
4. CORD CARE. Keep cord away from
heat, oil, and sharp objects. DO NOT
carry the charger by the cord, or pull-
the cord to unplug the charger.
5. CHARGER DAMAGE. Replace char-
ger if it has been dropped, damaged,
or received a hard impact. Repair cord
immediately if damaged.
6. SHORTING BATTERY. Avoid touch-
ing both battery terminals simultane-
ously with skin to prevent injury from
an electrical shock, or metal to prevent
a fire from a spark. Storing the battery
in a box of screws or nails can cause
fire from a spark.
7. CORD LOCATION. Prevent tripping
over the cord by placing charger close
to the power supply. Avoid using an
extension cord.
8. DISCONNECT CHARGER. Unplug
the charger when cleaning, or when
not in use.
9. BATTERY DISPOSAL. The battery
must be recycled or disposed of prop-
erly. DO NOT dispose of the battery
in a landfill or incinerate. Combustion
of some of the batteries' component
materials can cause toxic fumes and
possible explosion.