Filter
Top Products
-6-
H8154 AC/DC Stick/TIG Welder
American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126, (305) 443-9353, Website: www.
aws.org
.
—Safety in welding, Cutting, and Allied Processes, ANSI Standard Z49.1
—Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping,
AWS F4.1
National Fire Protection Association, P. O. Box 9101, 1 Battery March Park, Quincy, MA 02269-9101, (617)
770-3000, Website: www.nfpa.org and www.sparky.org.
—National Electrical Code, NFPA Standard 70
—Standard for Fire Prevention During Welding, Cutting, and Other Hot Work, NFPA Standard 51B
Compressed Gas Association, 1735 Jefferson Davis Highway, Suite 1004, Arlington, VA 22202-4102, (703)
412-0900, Website: www.cganet.com
.
—Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1
Canadian Standards Association, Standards Sales, 178 Rexdale Boulevard, Rexdale, Ontario, Canada
M9W 1R3, (800) 463-6727, Website: www.csa-international.org
.
—Code for Safety in Welding and Cutting, CSA Standard W117.2
American National Standards Institute (ANSI), 11 West 42nd Street, New York, NY 10036-8002, (212) 642-
4900, Website: www.ansi.org
.
—Practice for Occupational and Educational Eye and Face Protection, ANSI Standard Z87.1
U. S. Government Printing Office, Superintendent of Documents, P. O. Box 371954, Pittsburgh, PA 15250
(312) 353-2220, Website: www.osha.gov
.
—OSHA, Occupational Safety and Health Standards for General Industry, Title 29, Code of Federal
Regulations (CFR), Part 1910, Subpart Q, and Part 1929, Subpart J
American Conference of Government Industrial Hygienists (ACGIH), 1330 Kemper Meadow Drive, Suite
600, Cincinnati, OH 45240-1634, (513) 742-2020, Website: www.acgih.org.
—Threshold Limit Values (Booklet)
Additional Sources for
Welding Codes and Standards
Additional Sources
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other equipment with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all equipment there is potential danger
when operating this welder. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this welder with
respect and caution to lessen the possibility
of operator injury. If normal safety precau-
tions are overlooked or ignored, serious
personal injury may occur.