Filter
Top Products
-3-Model H8217
3
⁄8" Reversible Angle Drill 1500 RPM
INTRODUCTION
H8217 Inventory Qty
A. Bottle of Light Oil ............................... 1
B. Air Drill ............................................... 1
C.
1
⁄4" NPT Quick Connect Fitting (male) 1
D. Chuck Key .......................................... 1
Collet Size...............................................
3
⁄8"
No Load Speed.....................0−1,500 RPM
Air Consumption...............................6 CFM
Air Inlet.....................................................
1
⁄4"
Required PSI.....................................90 PSI
Maximum Sound Level.....................102 dB
Specifications
Foreword
The specifications, details, and
photographs in this manual represent
the Model H8217 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: manuals@grizzly.com
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
Figure 1. Model H8217 Inventory.
A
B
C
D
Inventory