Grizzly H8232 Nail Gun User Manual


 
Model H8232 3-Piece Framing/Finish/Palm Nailer Kit
-4-
Operating these nailers can propel
objects into the air, causing imme-
diate eye damage. To protect your-
self, always wear American National
Standards Institute (ANSI) approved
safety glasses or goggles when
operating this equipment. In addi-
tion, these nailers discharge at up
to 85-90 decibels. To protect your
hearing, always wear ANSI approved
ear protection when operating these
nailers.
Never point these nailers at yourself
or another person! Always pay atten-
tion to the direction these nailers are
pointed. Use these tools with respect
and caution to lessen the possibil-
ity of operator or bystander injury.
Ignoring this warning may result in
serious personal injury.
Nailer accidents routinely happen
while moving the gun to another
location, such as up ladders, to
another room, or even another job
site. Always disconnect the gun
immediately after use and never
transport the gun while connected
to the air—even if the air compres-
sor is disconnected from its power
source!
No list of safety guidelines can be
complete. Every shop environment
is different. Always consider safe-
ty first, as it applies to your indi-
vidual working conditions. Use this
and other tools with caution and
respect. Failure to do so could result
in serious personal injury, damage to
equipment or poor work results.
Read the manual before operation.
Become familiar with these nailers,
their safety instructions, and their
operation before beginning any work.
Serious personal injury may result if
safety or operational information is
not understood or followed.