Filter
Top Products
Model H8222 Spray Gun-4-
2. Attach the air hose directly to the
air fitting on the spray gun or with a
female
1
⁄4" NPT quick connect fitting
(not included).
3. Attach the spray gun to a filtered, regu-
lated air source. See the Specifications
on Page 3 for your spray gun air pres-
sure requirements.
Note: For the best results, use a hose
that will be dedicated for spray use
only. Do not use a hose that has been
used with an in-line oiler or other pos-
sible contaminant.
SETUP
Your spray gun left our warehouse in a
carefully packed box. If you discover the
spray gun is damaged after you have
signed for delivery, please immediately
call Customer Service at (570) 546-9663
for advice.
Save all packing materials for possible
inspection by the carrier or its agent.
Otherwise, filing a shipping claim can be
difficult.
After you have unpacked the box you
should find the following:
Model H8222 Inventory (Figure 1) Qty
A. Spray Gun ..........................................1
B. Cup ....................................................1
C. Multi-Wrench ...................................... 1
D. Cleaning Brush ..................................1
E. Barbed Hose Fitting (not shown) .......1
Inventory
Before assembling and using the spray gun,
thoroughly clean and dry all parts. Please
refer to Cleaning in the MAINTENANCE
section on Page 10 for more detailed
instructions. Make sure all connections are
tight enough to prevent air leaks but not so
tight as to damage the tool.
To setup the spray gun:
1. Attach the gun body to the cup as
shown in Figure 2.
Setup
Figure 2. Model H8222 gun body
installation.
Gun Body
Cup
Connection
Point
Air Fitting
Figure 1. Model H8222 inventory.
B
A
C
D