Filter
Top Products
Model H8222 Spray Gun -5-
1. Fluid Control: Controls the volume of
material that travels through the fluid
tip.
2. Pattern Control: Adjusts the spray
pattern from a round pattern to a wide
fan.
3. Atomizing Cap: Controls the spray
pattern from vertical to horizontal.
4. Trigger: Squeeze the trigger half way
to blow air, or squeeze all the way to
spray.
5. Air Flow Control: Controls the fluid
pressure inside the spray gun.
6. Cup: Holds up to 1000cc of material
for spraying.
Controls
Cup Removal & Installation
The cup is removed/installed by loosen-
ing/tighting the cup lock cover and engag-
ing/disengaging the cup pins in the cup
cover groove (see Figure 4).
Figure 4. Installing cup.
Cup Lock
Cover
Cup Pin
(1 of 3)
Figure 3. Controls.
Pattern Control
Atomizing Cap
Trigger
Fluid Control
Air Flow Control
Cup