Filter
Top Products
7.
Figure 14
8.
Figure 16
• ForT10499:
• ForT10500:
Note: As you rotate the clamp pressure
switch, the left clamp will move and apply
pressure toward the right. This pressure is
necessary to maintain contact between the
blade ends as the metal melts during the
welding operation.
Note: To ensure a good blade weld, it is
critical that the blade ends are secured in the
welding clamps evenly and with no overlap
(see Figure 15).
Blade Ends Butt Evenly
Blade Ends Flat w/No Overlap
Figure 15.
9.
10.
11.
ON
Figure 14.
Figure 16.