Haier 309463N Paint Sprayer User Manual


 
Installation
309463N 11
Installing a Fluid Regulator
(accessory)
Packages Without a Fluid Filter
1. Install Kit 234083 (nipple and washer) into pump
fluid outlet.
2. Install Part No. 112497 1/4 npt(m) x 3/8 npsm(f)
Swivel (B) in the inlet of Fluid Regulator 222121 (J).
See manual 307886 for information on the fluid reg-
ulator.
3. Install Part No. 166846 1/4 npt x 1/4 npsm Nipple
(C) in the outlet of Fluid Regulator 222121 (J).
4. Screw the swivel (B) onto the nipple (A).
5. Connect the fluid hose to nipple (C).
Packages With a Fluid Filter
1. Install Kit 234083 (nipple and washer) into pump
fluid outlet.
2. Install Part No. 235208 3/8 npt (mxf) Swivel (B) in
the inlet of Fluid Filter 223160 (F). The swivel and fil-
ter are supplied with some packages.
3. Install Part No. 166846 1/4 npt x 1/4 npsm Nipple
(C) in the outlet of Fluid Regulator 222121 (J). See
manual 307886 for information on the fluid regulator.
4. Screw the fluid regulator (J) onto the nipple (D) at
the outlet of the fluid filter (F).
5. Screw the swivel (B) onto the nipple (A).
6. Connect the fluid hose to nipple (C).
F
IG. 3. Fluid Regulator on Package Without Fluid
Filter
TI2104A
AB
JC
FIG. 4. Fluid Regulator on Package With Fluid Filter
TI2104A
AB
JC
F
D