Filter
Top Products
SKU 40134 Page 4
18. Use proper size and type extension cord. If an extension cord is required to
power tools, it must be of the proper size and type to supply the correct
current to the tool without heating up. Otherwise, the extension cord could
melt and catch fire, or cause electrical damage to the tool. Most hand tools
require an extension cord of 0 to 10 amps capability (up to 50 feet), with wire
size rated at 18 AWG. Longer extension cords require larger size wire. If you
are using the tool outdoors, use an extension cord rated for outdoor use.
(signified by “WA” on the jacket).
19. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Note: Performance of this product may vary depending on variations in line voltage.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are fac-
tors which cannot be built into this product, but must be supplied by the opera-
tor.
Unpacking
When unpacking, check to make sure the following parts are included.
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
(2)
(1)
(3)
(5)
(6)
(4)
(7)
(8)
NOTE: Some parts are listed and shown
for illustration purposes only and are not
available individually as replacement