Filter
Top Products
22. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly main-
tained tools.
23. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Always use proper guard with grinding wheel. A guard protects the operator
from broken wheel fragments.
2. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with a
“live” wire will make exposed metal parts of the tool “live” and shock the
operator.
3. Maintain labels and nameplates on the Polisher/Waxer. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
4. Always wear safety impact eye goggles and heavy work gloves when using
this tool. Using personal safety devices reduce the risk for injury. Safety impact
eye goggles and heavy work gloves are available from Harbor Freight Tools.
5. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp or
wet location.
6. WARNING! All accessories for this tool must be rated for at least 12,000
RPM. Grinding Wheels and other accessories running over the rated 12,000 RPM
speed can fly apart and cause injury.
7. When using a handheld power tool, always maintain a firm grip on the tool
with both hands to resist starting torque.
8. Use only 4-1/2” diameter Grinding Wheels that having a 5/8” center mounting hole.
Never disable or modify the Wheel Guard.
SKU 03150 PAGE 5
REV 01/04REV 04/06