Filter
Top Products
SKU 32208/32206 For technical questions, please call 1-800-444-3353. PAGE 4
FIGURE A
2. MAKE SURE THE POWER SWITCH IS IN THE “OFF” POSITION BEFORE
PLUGGING IN THE POWER CORD.
3. DO NOT ABUSE THE POWER CORD. Do not use the cord to pull the 3-prong
plug from a power outlet. Keep cord away from heat, oil, sharp edges, and moving
parts. Replace damaged cord immediately. Route the power cord safely. Protect
it from being damaged by other equipment in the shop. Do not route the cord where
it can be walked on or tripped over.
4. IF YOU USE AN EXTENSION CORD, MAKE SURE TO USE ONLY UL AP-
PROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH.
(SEE FIGURE A.)
5. MAINTAIN A SAFE WORK ENVIRONMENT. Do not use this product in or near
damp or wet areas. Do not expose this product to rain. Keep work area well lit.
Make sure there is adequate surrounding work space. Use this product in a well
ventilated area. Do not operate this product in the presence of flammable liquids,
gases, or dust. To avoid accidental electric shock, do not let your body come in
contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
6. DO NOT FORCE THE EQUIPMENT. This Bandsaw will do the work better and
safer at the speed and capacity for which it was designed.
7. KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER.
8. REMOVE ALL ADJUSTING WRENCHES FROM THE BANDSAW BEFORE
TURNING IT ON.
9. MAKE SURE THAT WHEN INSTALLING THE SAW BLADE THE SAW TEETH
POINT DOWNWARD AND TOWARD THE TABLE (36) OF THE BANDSAW.