Filter
Top Products
SKU 32208/32206 For technical questions, please call 1-800-444-3353. PAGE 8
FIGURE I
FIGURE J
REAR
VIEW
To Assemble The Bandsaw Body To The Stand:
1. With additional help, set the Bandsaw Body on the Stand. Make sure the Table
(36B) faces to the
front
of the Stand.
2. Align the four mounting holes on the Base (2B) of the Bandsaw Body with the holes
located on the Face Plate (1A) of the Stand.
3. Attach the Bandsaw Body securely to the Stand, using the four Hex Bolts, Washers,
Spring Washers, and Nuts (III). (See Figures I, J, and Hardware
Diagram.)
To Mount The V-Belt Onto The Belt Pulley And Motor Pulley - Model 32206/
Single Speed:
1. Open the Side Panel Door (38A). (See Figure K.)
FIGURE H (REAR VIEW)