Harbor Freight Tools 3418 Battery Charger User Manual


 
Page 6SKU 03418 For technical questions, please call 1-800-444-3353.
5. Always unplug the Battery Charger from its electrical outlet before connecting
its cables to a battery, or performing and inspection, maintenance, or cleaning
procedures.
Keep extension cord off wet ground and away from water.6.
Use this Battery Charger with lead/acid batteries only. When charging a maintenance-7.
free battery, always monitor the progress of the charge by viewing the ammeter. Do
not over charge a maintenance-free battery.
Do not attempt to charge non-rechargeable or defective batteries.8.
Keep connections and cable clamps clean and free from corrosion.9.
Never simultaneously charge several batteries.10.
Do not discard used batteries in the trash. Properly recycle according to local 11.
environmental codes.
WARNING:12. This product contains or, when used, produces a chemical known to the
State of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
WARNING:13. People with pacemakers should consult their physician(s) before using this
product. Electromagnetic elds in close proximity to a heart pacemaker could cause
interference to or failure of the pacemaker.
14. Risk of Explosion!
If you detect gas, do not switch off the unit. Do not disconnect the charging
clamps. Immediately ventilate the room by opening windows and doors. Do
not switch on an electrical fan. When the air has cleared of gas, unplug the unit
from the electrical outlet.
Charge the battery in a well-ventilated area.
To prevent sparking due to electrostatic discharge, never wear clothes made of
synthetic materials when charging the battery.
Avoid creating or working around any ames or sparks; ames or sparks can ignite
the gasses caused by charging and cause an explosion.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual as soon as possible.