Filter
Top Products
SKU 40089 PAGE 2
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice
in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1. KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries.
2. KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA. Do not allow children to climb on this
product or play around tools or supplies.
3. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read
warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking
drugs. If there is any doubt, do not attempt to use this product.
4. STAY ALERT. Watch what you are doing at all times. Use common sense. Do not use a Buffer or
Grinder mounted on this product when you are tired or distracted.
5. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly
and perform its intended function. Check for damaged parts and any other conditions that may affect
its operation. Replace or repair damaged or worn parts immediately.
6. DO NOT MODIFY THIS PRODUCT. This product is designed to support a Grinder or Buffer. Do
not modify this Cabinet in an attempt to use it for other purposes.
7. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement
parts. Only use accessories intended for use with this product. Approved accessories are
available from Harbor Freight Tools.
8. USE THIS PRODUCT only for its intended use, as described in this manual. Do not use
attachments or modify it in any way.
9. BE SURE to use proper hardware (not included) to secure Grinder or Buffer.
NOTE: Always read and adhere to all warnings and instructions provided in the instruction manual of the buffer
or grinder being used.
WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
SPECIFICATIONS
DESCRIPTION
Body: Formed and Stamped Sheet Steel
Black Powder Coat
34-1/4”H X 15-3/4”L X 12-3/8”W
3/8”W X 2-3/4”L (6X Slotted Holes)
308” Dia. (4X)
13-3.8” X 12-3/8”
12-1/8” X 12-3/8”
10-5/8” X 12-3/8”
12-7/8”W X 10”L X 1-7/8”H
47 Lbs.
ITEM
Body Construction
Finish
Overall Dimensions
Top Mounting Holes
Base Mounting Holes
Lower Shelf
Middle Shelf
Top Shelf
Top Dimensions
Overall Weight