Filter
Top Products
SKU 4095 For technical questions, please call 1-800-444-3353. PAGE 10
UNPACKING
When unpacking, check to make sure that the tool is intact and undamaged. If any parts
are missing or broken, please call Harbor Freight Tools at the number shown on the cover
of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram on page 14.
WARNING: Always make sure the Power Cord (44) of the Reciprocating Saw is un-
plugged from its electrical outlet prior to making any adjustments to the tool.
To Install A Saw Blade:
1. Select the Saw Blade (59, 60) best suited for your application. The Wood Blade
(59) has a coarser tooth pitch. The Metal Blade (60) has a finer tooth pitch. Make
sure to use each Blade only for its specified material. (See Figure B.)
2. With the Hex Key (62), loosen but do not remove the Hex Screw (6B).
(See Figure B.)
3. Slide the selected Saw Blade (58, 60) teeth down into the Guard Plate (2) as far as
possible.
4. Then, firmly retighten the Hex Screw (6B) to secure the Saw Blade (59, 60) in place.
(See Figure B.)
HEX SCREW (6B)
WOOD
SAW
BLADE
(59)
METAL SAW BLADE (60)
HEX KEY (62)
TRIGGER (37)
TRIGGER
LOCK
POWER CORD (44)
GUARD PLATE (2)
FIGURE B
SPEED
CONTROL
(19)
ADJUSTABLE
SHOE PLATE
(1)
REV 10/05