Filter
Top Products
SKU 4095 For technical questions, please call 1-800-444-3353. PAGE 6
13. Always unplug the Saw from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
14. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Leadfromlead-basedpaints.
• Crystallinesilicafrombricksandcementorothermasonryproducts.
• Arsenicandchromiumfromchemicallytreatedlumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
15. Always check the Saw Blade (59, 60) to make sure it does not have missing teeth,
cracks, or is bent. Do not use a damaged Saw Blade.
16. Check that there is enough space under and behind the workpiece for the
reciprocating Saw Blade (59, 60). Make sure you will not be cutting through any
electrical wires or your workbench.
17. Never attempt to remove material stuck in the moving parts of the Reciprocating
Saw while the Saw is “ON” or plugged in to its electrical outlet.
18. Never cut material that is thicker than the length of the Saw Blade (59, 60).
19. Do not exert side-to-side pressure on the Saw Blade (59, 60) or attempt to cut
curves. Doing so will break the Saw Blade and possibly cause pieces of the blade
to fly outward, causing injury.