Filter
Top Products
STAY ALERT. 11.
Watch what you are doing. Do not operate any machinery when you are tired.
DO NOT OPERATE MACHINERY WHILE UNDER THE INFLUENCE OF ALCOHOL, DRUGS, OR 12.
PRESCRIPTION MEDICINES.
CHECK FOR DAMAGED PARTS.13. Before using any tool, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check for
alignment and binding of moving parts, any broken parts or mounting xtures, and any other condition
that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a
qualied technician.
REPLACEMENT PARTS AND ACCESSORIES. 14. When servicing, use only identical replacement parts,
available from Harbor Freight Tools. Use of any other parts will void the warranty.
Page 4 SKU # 41711
NOTICE: No list of warnings can be all inclusive. The operator must
supply common sense, and operate this tool in a safe manner.
SPECIAL WARNINGS WHEN USING THIS TILE CUTTER
Using this Tool may create special hazards.
Take particular care to safeguard yourself and those around you.
Do not exceed the material thickness limitation. You can make straight cuts in tiles up to 5/8” thick, and
cut holes in tiles up to 3/8” thick with this machine. Attempting to cut thicker material may cause damage to
the machine and potential personal injury.
Crushing and Marring. Using excessive force on the lever, or using dull or dirty cutter wheels can
cause damage to your workpiece. Before cutting any material with this tool, assure that the cutting wheel
or tip is in good condition. When moving the handle, assure that the pressure applied is appropriate to the
thickness and hardness of the tile being scored.
Guiding and Supporting Materials. Materials must be supported while scoring, or breaking.
Wear Eye protective glasses when operating this tool. Occasionally splinters or shards may split off and
be ejected whil using this tool. Protect your eyes to prevent injury.
Avoid injury to your hands and ngers. Keep your hands away from the moving and cutting parts of this
tool during operation.