Filter
Top Products
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model_____________ Serial No.____________ Purchase Date_____________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Tool Name: Stand, Bench Grinder Pedestal
Item Number: 42986
Stand Height: 29-1/2"
Table Dimensions: 11" x 9-5/8"
Table Mount Slots: (Qty =6) 5/8" wide
Base Dimensions: 17-1/4" Triangle
Base Mount Holes: 3/8" Diameter
Material: Cold Rolled Steel and Cast Iron
Finish: Grey Enamel Paint
Weight: 21.60
Maximum Weight Capacity: 75 Lbs.
Warning: The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that COMMON
SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE
SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product to be used with this item, if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in parts.
Protective gloves and non-skid footwear are recommended.
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Maintain proper footing and balance at all times.
Use the right product for the job. Do not attempt to force a large tool or attachment to do the work of a smaller
industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do
not use this tool for a purpose for which it was not intended.
#42986 Page 2