Filter
Top Products
OPERATING INSTRUCTIONS
NOTE: All parts below refer to assembly diagram listed on page 8 of this
manual.
1. Plug the 3-Prong Power Cord Plug (not shown in Assembly Illustration) of the
unit into a grounded, 3-Hole Electrical Outlet.
2. Select the size, type, and thickness of the bag to be sealed (up to 12” wide.
Polyethylene, under 0.06mm to 0.2mm; or Polypropylene, under 0.03mm to
0.08mm).
3. Make sure the Handle (part #36) is in the upward/open position.
4. Refer to the “Heat Adjustment Chart” (shown below) in order to set the Timer
Knob (part #48) to the proper setting according to the size, type, and thickness of
sealing bag selected.
5. Fill the sealing bag to approximately 3/4 full with contents to be sealed and align
the top edges of the bag.
6. Turn the Timer Knob clockwise to the desired heating time (1 to 8).
7. Position the aligned top edges of the sealing bag over the top ridge of the Teflon
Cloth (part #25) and hold in place. (NOTE: Allow approximately 1” excess waste
of sealing bag material as (shown below).
SKU 43477 PAGE 4 REV. 10/03
MATERIAL
INDICATOR
UNDER 0.06 m/m
UNDER 0.1 m/m
UNDER 0.14 m/m
UNDER 0.2 m/m UNDER 0.03 m/m
UNDER 0.044 m/m
UNDER 0.06 m/m
UNDER 0.08 m/m
1” Excess
Waste Mtl.
Timer
Knob
Teflon
Cloth
Sealing
Bag
43477 manual.p65 10/15/03, 3:19 PM4