Filter
Top Products
ASSEMBLY INSTRUCTIONS
ALL PARTS BELOW REFER TO THE PARTS SHOWN ON PAGE 6.
Note: To insure safe assembly of this product, two people should assemble
the Car Canopy.
1. Connect the assorted Tubes and Swaged Tubes (parts #2, 3, 4, 5, 6, 7), 3-Way End
Pieces (part #8), and 4-Way Center Pieces (part #9) together as shown in Figure A.
FIGURE A
2. The eight Turnbuckles (part #11) are used to strengthen the frame assembly.
Attach the Turnbuckles to the frame assembly and tighten, using a pair of pliers.
NOTE: Do not over tighten the Turnbuckles, as bending to the frame assembly
will occur. (See Figure B.)
SKU 45211 PAGE 4
FIGURE B