Filter
Top Products
Page 2SKU 45338
SPECIFICATIONS
Item Description
Power Consumption 120 VAC, 60 Hz, single phase, 6.3 amps (load),
750 watts
Motor
Double insulated
Chuck Capacity 3/64 to 1/2 inch, plus key chuck
Chuck Thread 1/2" - 20 UNF
Speed 0 ~ 2800 RPM (no load); 0 ~ 42,000 BPM
Switch Electronic variable speed trigger, forward and
reverse; continuous run trigger lock; maximum
speed set
Power Cord 6 feet long, 18 AWG/2C, 2-prong polarized plug,
UL listed
Weight 4.9 lbs.
Features - High Impact Housing
- Side grip handle
- Belt hook
- Depth gauge
- Removable chuck
- Ideal for hard materials: concrete, marble,
and steel
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instruc-
tions listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
E194601