Filter
Top Products
Page 4
SKU 45725
Note: Performance of this tool (if powered by line voltage) may vary depending on
variations in local line voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activites, contain chemicals known [to the State of California] to cause
cancer, birth defects or other reproductive harm. some examples of these chemicals
are:
* Lead from lead-based paints
* Crystalline cilica from bricks and cement or other masonry products
* Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
(California Health & Safety Code 25249.5,
et seq.
)
Unpacking
When unpacking, check to make sure parts listed on page 8 are included. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Note: This tool comes equipped with a 220 V power cord
with no plug. Have a plug installed by a licensed electrician.
This tool will only work on a 220 V outlet. If you need one
installed, use a licensed electrician.
Assembly
1. Have a licensed electrician attach a 220 Volt plug to the power cord.
2. Stick a PSA (Pressure Sensitive Adhesive) backed 20 inch sanding disc on the metal
sanding / grinding disc.
Warning! Operation of equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
REV 05/02