Harbor Freight Tools 45891 Stud Sensor User Manual


 
Page 2 For technical questions, please call 1-800-444-3353. Item 45891
REV 02d, 04c, 07f
Specifications
Overall Dimensions 9-7/8" H x 11" D (w/Front Panel),
10-1/2" D (w/o Front Panel) x 13-3/4" W
Internal Dimensions 13-1/2" W x 9-1/2” H x 9-5/8" D
Included Items 4 Concrete Fasteners, Felt pad, Hole Template
Power Required “AA” Batteries x 4
Weight 35.6 lb.
Important Safety Information
1. Verify that installation surface
has no hidden utility lines before
drilling or driving screws.
2. Wear ANSI-approved safety
goggles during installation.
3. Install only according to these
instructions. Improper installation
can create hazards.
4. Keep installation area clean and well lit.
5. Keep bystanders out of the
area during installation.
6. Do not install when tired or when
under the influence of alcohol,
drugs or medication.
7. Place the Safe on correct surface.
Only use this Safe on a stable,
level, clean and dry surface that is
capable of sustaining the load.
8. Keep closed and locked whenever
unattended. RISK OF CHILD
ENTRAPMENT AND SUFFOCATION.
Check inside before closing.
Do not allow children to play
with or near safe. Keep keys and
codes away from children.
9. Keep clear of door when closing.
10. Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.
11. Use as intended only.
12. Inspect before every use; do not use
if parts are loose or damaged.
13. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
14. Do not store Keys inside of the Safe.
Place your emergency keys in
a location outside of the safe
making sure they are in a secure
location that you can find.
15. Warning: The brass components of
this product contain lead, a chemical
known to the State of California
to cause birth defects (or other
reproductive harm). (California Health
& Safety code § 25249.5, et seq.)
16. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
17. The Safe is not fireproof.
NOTE: Harbor Freight Tools is not
responsible for the loss of any property
stored within this safe due to theft,
fire, or any other circumstance.