Filter
Top Products
SKU 46407 Page 2
Specications
Overall Dimensions 56” L x 18” W x 31-1/8” H
Base Mounting Holes 4, .39” holes @ 8-1/2” apart from center
Leg Distance 49” x 15” with .31” mounting holes on each leg
Weight 21 lb.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly in-
structions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
Avoid working alone. If an accident happens, an assistant can bring help.
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Don’t expose to rain. Keep work area well
lighted.
Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry loca-
tion to inhibit rust. Always lock up tools and keep out of reach of children.
Dress properly. Do not wear loose clothing or jewelry as they can be
caught in moving parts. Protective, electrically nonconductive clothes and
nonskid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety
goggles.
Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across electrical cables or frames.
Maintain tools with care. Inspect Lathe Stand periodically and, if damaged,
have it repaired by an authorized technician.
Use the right Lathe Stand for the job. Do not attempt to force a small
Lathe Stand to do the work of a larger industrial tool. There are certain ap-
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.