Filter
Top Products
Page 6 For technical questions, please call 1-888-866-5797. Item 61565
Maintenance
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
1. Low battery power warning: The red LED light on the keypad will light when the batteries
wear down. When you observe the red LED light on, immediately replace the batteries.
2. Protect the safe from moist or wet conditions. This may cause electronic
fault in the keypad, or corrosion of the steel construction.
3. Occasionally wipe the safe and keypad with a soft dry cloth or brush to remove dust.
4. Occasionally apply a small amount of light oil or lock lubricant to the mechanical lock
mechanism. Be careful not to get any oil or other liquids on or near the electronic mechanism.
5. Occasionally apply a small amount of oil to the wheel axles.
6. Occasionally vacuum or brush dust from the carpet lining of the safe.