Filter
Top Products
SKU 65040 For technical questions, please call 1-800-444-3353. Page 4
er periodically, and if damaged, have
it repaired by an authorized service
facility. Keep handles dry, clean, and
free from oil and grease.
Check Damaged Parts - Before 5.
further use of the appliance, a guard
or other part that is damaged should
be carefully checked to determine
that it will operate properly and per-
form its intended function. Check for
alignment of moving parts, binding
of moving parts, breakage of parts,
mounting, and any other condition
that may affect its operation. A guard
or other part that is damaged should
be properly repaired or replaced by a
qualied technician unless indicated
elsewhere in this manual.
Do not use appliance for other than 6.
intended use.
Maintain labels and nameplates on 7.
the appliance. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
The warnings, precautions, and in-8.
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
SPECIFICATIONS
Tank Capacity 4 Gallons
Operating PSI 44 - 58 PSI
Spray Range 23” - 31”
Flow Rate
17 - 54 oz. (Depending
on Spray Head Type)
Pump Type Manual Hand Pump
Weight 7 lbs.
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INSTRUCTIONS
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Before operating any gardening ap-1.
pliance, put on ANSI-approved safety
goggles and other safety gear. Safe-
ty goggles and other safety gear are
sold separately.
Spray Head Selection And
Assembly: