Filter
Top Products
SKU 65159 60 61 For technical questions, please call 1-800-444-3353. Page 8
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Inspect tool before use, looking
for damaged, loose, and
missing parts. If any problems
are found, do not use tool until
repaired.
Tool Set Up
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION: Detach the air
supply, safely discharge any
residual air pressure in the
tool, and release the throttle
and/or turn the switch to its
off position before performing
any inspection, maintenance,
or cleaning procedures.
TO PREVENT SERIOUS
INJURY: Do not adjust or
tamper with any control or
component in a way not
specically explained within
this manual. Improper
adjustment can result in
tool failure or other serious
hazards.
For 1. 65159 1/4” Air Ratchet, insert
1/4” drive socket (not included) onto
Anvil (38).
For 65160 1/2” Air Ratchet, insert
1/2” drive socket (not included) onto
Anvil (45).
For 65161 3/8” Air Ratchet, insert
3/8” drive socket (not included) onto
Anvil (45).
Designate a work area that is clean 2.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Route air hose along a safe route to 3.
reach work area without creating a
tripping hazard or exposing the air
hose to possible damage. The air
hose must be long enough to reach
work area with enough extra length to
allow free movement while working.
Secure loose workpieces using a vise 4.
or clamps (not included) to prevent
movement while working.
There must not be hazardous ob-5.
jects (such as utility lines or foreign
objects) nearby that will present a
hazard while working.
General Operating Instructions
If an automatic oiler is not used, 1. add
a few drops of Pneumatic Tool Oil
to the airline connection before use.
Add a few drops more after each
hour of continual use.
Attach an air hose to the compres-2.
sor’s air outlet. Connect the air hose
to the air inlet of the tool.
For 65159 1/4” Air Ratchet, turn
Forward/Reverse Lever (35A) to the
desired orientation. Set to Forward by
turning counterclockwise; Reverse by
turning clockwise.
For 65160 1/2” Air Ratchet, turn
Forward/Reverse Lever (42) to the