Filter
Top Products
SKU 65410 For technical questions, please call 1-800-444-3353. Page 8
Tool
Air
Compressor
Quick
Coupler
Air Hose
on Reel
Filter
Regulator with
Pressure Gauge
Male
Connector
Male
Connector
Valve
Quick
Coupler
Recommended Air Line Components
Oiler
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
Make sure the air tool’s throttle or 1.
switch is in the off position.
Connect the tool that will be used for 2.
the job to the airline.
Close the in-line safety valve be-3.
tween the compressor and the tool.
Connect an air hose rated to the 4.
intended PSI that will be used with
the tool to the Air Connection (47).
The air hose must be long enough
to reach the work area with enough
extra length to allow free movement
while working.
Plug the Power Cord into a grounded 5.
120 V electrical outlet. Do not use an
extension cord with this product.
Pull the Power Switch up to turn it on.6.
Power
Switch
Pressure
Regulator
(48)
Pressure
Valve
Tank
Pressure
Gauge
Tool
Pressure
Gauge
Allow the Air Compressor to build up 7.
pressure until it cycles off.
Open the Pressure Valve.8.
Adjust the air compressor’s Regula-9.
tor so that the air output is enough