Filter
Top Products
SKU 66103 For technical questions, please call 1-800-444-3353. Page 3
Personal safety
Stay alert. Watch what you are do-a.
ing and use common sense when
operating. Do not use while tired
or under the inuence of drugs, al-
cohol, or medication. A moment of
inattention while operating increases
the risk of injury.
Dress properly. Do not wear loose b.
clothing or jewelry. Contain long
hair. Keep hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
increases the risk of personal injury
as a result of being caught in moving
parts.
Avoid unintentional starting. Be c.
sure the switch is off before con-
necting to the air supply. Do not
carry the tool with your nger on the
Spray Gun Trigger, or connect the
tool to the air supply with the Trigger
depressed.
Do not overreach. Keep proper d.
footing and balance at all times.
Proper footing and balance enables
better control in unexpected situa-
tions.
e. Use safety equipment. A
dust mask, non-skid safety
shoes and a hard hat must
be used for the applicable
conditions. Wear heavy-duty work
gloves during use.
f. Always wear eye protec-
tion. Wear ANSI-ap-
proved safety goggles.
g. Always wear hearing
protection when using
the tool. Prolonged expo-
sure to high intensity noise is able to
cause hearing loss.
Risk of Electric Shock. This Tex-h.
ture Spray Paint Gun is not pro-
vided with an insulated gripping
surface. Contact with a ″live″ wire will
also make exposed metal parts of the
tool ″live″ and shock the operator.
Avoid body contact with grounded i.
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
Tool use and care
Do not force the tool. a. Use the
correct tool for the application. The
correct tool will do the job better and
safer at the rate for which the tool is
designed.
Do not use the tool if the switch b.
does not turn the tool on or off.
Any tool that cannot be controlled
with the switch is dangerous and
must be repaired.
Disconnect the tool from the air c.
source before making any adjust-
ments, changing accessories, or
storing the tool. Such preventive
safety measures reduce the risk of
starting the tool unintentionally. Turn
off and detach the air supply, safely
discharge any residual air pressure,
and release the Gun Trigger before
leaving the work area.
Store the idle Texture Paint Spray d.
Gun out of reach of children and
other untrained persons. A tool is
dangerous in the hands of untrained
users.