Filter
Top Products
SKU 66222 For technical questions, please call 1-800-444-3353. Page 13
USER MAINTENANCE
INSTRUCTIONS
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM
ACCIDENTAL OPERATION:
Turn off the tool, detach the
air supply, safely discharge
any residual air pressure in
the tool, and release the
throttle and/or turn the trigger
to its off position before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal
noise, vibration, or leaking
air occurs, have the problem
corrected before further use.
Cleaning, Maintenance,
and Lubrication
Note: These procedures are in addition to
the regular checks and maintenance
explained as part of the regular op-
eration of the air-operated tool.
Cleaning the Sprayer
IMPORTANT: The Spray Gun must 1.
be cleaned every time immediately
after use. Improper cleaning is the
primary cause of Spray Gun failure.
Immediately after nishing painting, 2.
pour out remaining paint from the
Cup. Rinse out the cup with paint
thinner. Wipe out the cup to clean
remaining paint residue. Fill the Cup
part way with paint thinner and spray
into a suitable container. Continue
to spray until the thinner comes out
clear.
Dump remaining thinner from the Cup 3.
back into the thinner container. Wipe
off the exterior of the Spray Gun with
thinner to remove paint.
If the gun becomes clogged, disassemble 4.
parts 1 - 7, 9 -12 and 26 - 30 and carefully
clean all the parts.
To clean, use the enclosed brush (33) 5.
or a cleaning kit, such as SKU# 99634
available from Harbor Freight Tools.
Never use a pin or metal scraper to 6.
clean the delicate components of this
sprayer. You will damage the sprayer.
Carefully reassemble following the 7.
Assembly diagram on page 17. Be
sure all springs and seals are prop-
erly seated. Do not damage threads.
Do not overtighten.