Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353.
Item 67854
91214
WARNING
INHALATION HAZARD:
Welding and Plasma Cutting Produce
TOXIC FUMES.
Exposure to welding or cutting exhaust
fumes can increase the risk of developing
certain cancers, such as cancer of the
larynx and lung cancer. Also, some
diseases that may be linked to exposure
to welding or plasma cutting exhaust
fumes are:
• Early onset of Parkinson’s Disease
• Heart disease • Ulcers
• Damage to the reproductive organs
• Inammation of the small intestine or
stomach • Kidney damage
• Respiratory diseases such as
emphysema, bronchitis, or pneumonia
Use natural or forced air ventilation and
wear a respirator approved by NIOSH to
protect against the fumes produced to
reduce the risk of developing the above
illnesses.
Maintain the helmet and lens correctly 15.
to help ensure reliable protection.
Clean lter’s surfaces regularly.•
Keep sensors and solar cells clean
using a clean lint-free tissue/cloth. Do
not use any solvents on lter’s screen or
helmet components. Protect lter from
liquid and dirt contact. Do not immerse
the lter in water.
Should the Auto-Darkening Welding •
Helmet not darken upon striking
an arc, stop welding immediately
and have the helmet checked by an
authorized service technician.
Regularly replace the Front Lens •
Cover if it becomes cracked,
scratched, pitted, or otherwise
damaged.
Do not make any modications to •
either the Auto-Darkening Filter or
the rest of the helmet, other than
those specied in this manual.
Do not use any replacement parts
other than those specied in this
manual. Unauthorized modications
and replacement parts will void the
warranty and expose the user to the
risk of personal injury. Do not open
or tamper with the Auto-Darkening
Filter.
Do not place the Welding Helmet’s 16.
Auto-Darkening Filter on a hot
surface.
SEVERE PERSONAL INJURY17. and/
or BLINDNESS may occur if the user
fails to follow the aforementioned
warnings and/or fails to follow the
operation instructions.