Filter
Top Products
Page 14 For technical questions, please call 1‑800‑444‑3353. SKU 68024
5. If the tool requires more force to
accomplish the task, verify that the
tool receives sufcient, unobstructed
airow (CFM) and increase the pressure
(PSI) output of the regulator up to the
maximum air pressure rating of this tool.
CAUTION! TO PREVENT TOOL AND
ACCESSORY FAILURE, RESULTING
IN INJURY: Do not exceed the tool’s
maximum air pressure rating.
If the tool still does not have sufcient
force at maximum pressure and
sufcient airow, then a larger tool may
be required.
Note: While working on roofs, tar and
dirt may build up on the Nose of the
Roong Nailer. This can prevent normal
operation. Remove buildup with a
nonammable solvent. NEVER use
gasoline or other ammable solvents.
Do not immerse the Roong Nailer in
an approved solvent beyond the height
of the nail heads, to avoid getting the
solvent into the drive cylinder of the
tool. Dry off the Roong Nailer before
use; any oil lm left after cleanup will
accelerate tar buildup.
6. After use, to prevent accidents:
a. Release the trigger.
b. Detach the air supply.
c. Attempt to re the Tool into a piece
of scrap wood to ensure that it is
incapable of ring any fasteners.
d. Release the trigger again.
e. Clean external surfaces with clean,
dry cloth.
f. Store indoors out of children’s reach.