Filter
Top Products
Page 2 For technical questions, please call 1-800-444-3353. Item 68114/69070
Specications
Type Carbon Steel
Piece Count 11
Saw Sizes
1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″,
2-1/8″, 2-1/4″, 2-1/2″
Other Pieces
Large Mandrel
Pilot Drill Bit
Blow Molded Case
IMPORTANT SAFETY INFORMATION
1. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during setup and use.
2. Set contains sharp blades.
Keep away from children.
3. Use correct size arbor for
selected Hole Saw.
4. Verify drill’s chuck is in good
condition and ts securely.
5. Do not use excessive pressure
when cutting a hole.
6. Use as intended only;
do not modify tools.
7. Inspect before every use; do not
use if parts are loose or damaged.
8. Use both hands when drilling and
keep blade at 90° to workpiece.
9. Store saw blades in Case in secure
location away from children.
10. Read and adhere to all safety
warnings and operating instructions
of drill used with Set.
11. The warnings, cautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must
be supplied by the operator.
SAVE THESE INSTRUCTIONS.