Filter
Top Products
Operation
1. Holding the drill at 90° to the workpiece,
set the Hole Saw on the workpiece.
2. Press the drill’s trigger to turn it on.
3. If the drill is a variable speed type,
cut the workpiece slowly until a circle
groove is made in the workpiece.
Then cut faster.
4. When the hole is cut, release the
trigger and wait for the Hole Saw
to come to a complete stop before
removing it from the workpiece.
5. When nished, remove
the Hole Saw from drill’s chuck.
6. Remove Hole Saw from the Mandrel
and clean off Hole Saw with a cloth.
7. Store the Hole Saws inside case,
out of reach of children.
8. Replace the Pilot Drill Bit if
dull or broken.
Make sure the Bit is securely held
in place after being reinstalled.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection veries the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specic legal rights and you may also
have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353