Filter
Top Products
Page 3For technical questions, please call 1-800-444-3353.Item 69572
Assembly Instructions
Note: All parts are secured using Bolts, Nuts, and Washers (8), with the Bolts inserted
from outside the rack. Only finger tighten Bolts and Nuts (8) until assembly is complete.
1. Using two bolts from the side
and one bolt from the back,
attach the Left Panel (1) to the
Top (3) with the lip facing inside.
2. Repeat step 1 to attach the
Right Panel (2) to the Top (3).
3. Attach a Back Brace (7) to the lowest
hole on the back of each Panel (1,2).
4. Cross the Back Braces (7) and attach to
the upper holes on the opposing Panels.
5. Place a Bracket (4) on each end
of a Shelf (5). Align the Shelf and
Brackets in place between the Panels,
and secure two bolts each end.
6. Repeat step 5 for the other two Shelves.
7. Make sure the assembly rests level,
then wrench tighten all
Nuts and Bolts (8).
8. Place the Bins (6) onto the Shelves.
Parts List and Diagram
Part Description Qty
1 Left Panel 1
2 Right Panel 1
3 Top 1
4 Bracket 6
Part Description Qty
5 Shelf 3
6 Bin 24
7 Back Brace 2
8 M6 x 12 Bolt-Nut-Washer Set 22
3
2
1
7
8
View from rear
1
3
2456
View from front